Institute for Astronomy and Astrophysics


eROSITA (extended Roentgen Survey with an Imaging Telescope Array) is the first mission to scan the entire sky in the medium X-ray energy range. eROSITA is located as one of two instruments on the satellite Spektrum-Röntgen-Gamma. The launch of the satellite is scheduled for 2019. The project is supported by the German Aerospace Center (German: Deutsches Zentrum für Luft- und Raumfahrt e.V., abbrv. DLR) and coordinated by the Max Planck Society for the Advancement of Science (German: Max-Planck-Gesellschaft zur Förderung der Wissenschaften e.V., abbrv. MPG), in corporation with the Russian space agency Roskosmos. eROSITA consists of seven identical cameras and mirrors. The plan is a scan the whole sky for about four years in an energy range of 0.5 to 10 keV. Another three years of eROSITA’s lifetime is planned for the observation of selected sources and regions. By scanning the entire sky, eROSITA is expected to detect many new sources and clusters of galaxies. Hence, it would be possible to learn more about the distribution of dark matter and dark energy in the universe and to test new cosmological models.

Launch: scheduled for 2019 with a Sojus-2 rocket

Energy range: 0.5 – 10 keV

Scientific goals: Observation of clusters of galaxies to get new information about the distribution of dark matter and energy, as well as detection of active galactic nuclei (AGN), gamma-ray bursts (GRBs), the diffuse emission of interstellar dust and the analysis of dust scattering halos.


On board of the satellite Spektrum-Röntgen-Gamma, there will be two instruments: eROSITA and ART-XC (Astronomical Roentgen Telescope – X-ray Concentrator). ART-XC is planned to observe energies ranging from 6 – 30 keV and would therefore complement eROSITA to higher energies.

eROSITA consists of seven identical Wolter-I-mirror telescopes which are aligned parallel. Each of those telescopes has its own focusing optics as well as its own detector. The detectors are based on the pn-CCDs of XMM-Newton. The mirrors are built of 54 Wolter-I-mirror-layers, which are nested into each other to increase the effective area for small reflection angles. eROSITA is planned to have an height of 3.2 m, an inner cross section of 1.9 m and a total weight of 735 kg.


eROSITA uses a framestore pn-CCD detector, designed at the Max Planck Institute for Extraterrestrial Physics (MPE) in Neuperlach. The eROSITA-CCDs are implemented on a silicon wafer, which has a thickness of about 450 μm.

The size of the pixels is 75 μm x 75 μm. Taking the total number of 384 x 384 pixels, the total area of the detector is 28.8 mm x 28.8 mm. This region is called the image area. The eROSITA detector is similar to the one of XMM-Newton, but has in addition also a framstore area, which consists of another 384 x 384 pixels. In contrast to the image area, the framestore area is shielded against X-ray radiation. After an exposure time of 50 ms, the electrons , which are collected in the pixels, are transported line by line in a time of 200 μs to the framestore area. The readout electronics processes the data in less than 10 ms, so that there are no misinterpreted photon counts during the readout process. Then, the framestore area is readout line by line by three CAMEX chips (CMOS Amplifier and MultiplEXer). Afterwards, the signals are amplified and digitized for further processing on the board computer.

The image area is shielded against UV-radiation with a 170 nm thick filter on the CCDs made of silicon dioxide, silicon nitride and a layer of aluminium. The CCD and CAMEX layer has an additional proton shield out of copper with a graded-Z-shield. The temperature is constantly kept at about -80°C to minimize thermal noise. For calibration, a Fe55 source is placed in front of the CCD.

Table: Technical values of eROSITA:

Number of mirrors


Number of layers per mirror


Field of view

Angular resolution

<15‘‘ bei 1 keV

Energy range

0,5 – 10 keV

Energy resolution

130 eV bei 6 keV


1100 cm² bei 1.4 keV

Cross section of a mirror module

358 mm

Focal length

1600 mm

Scientific goals

One of the main advantages of eROSITA is that the instrument can measure fluxes down to very small values. Therefore, it is possible to detect weak sources with a large field of view. We hope to detect many new sources with eROSITA, which is also described in the next section.

The main goal of eROSITA is to get new information about the distribution of dark matter and dark energy. To achieve this goal, about 100 000 clusters of galaxies will be detected during the four year scan of the entire sky. Clusters of galaxies contain about 1000 galaxies. These galaxies make up about 2% of the total mass of the cluster. The rest is about 11% intracluster medium and 87% dark matter. Clusters are good objects to analyze the structure and evolution of large-scale structures in the universe because they are bound by gravity. They are observed in the X-ray range because the hot intracluster gas emits mainly thermal X-ray radiation due to the Planck’s law.

By studying large-scale structures in the universe, it is possible to draw conclusions about the origin, geometry and evolution of the universe. The evolutionary process is related to the gravitational force and therefore to the distribution of the dark matter, while the dark energy mainly influences the evolution of the spatial distribution.

Another scientific goal is the detection of new AGN in the local universe. By making population studies of AGN, we can draw new conclusions about the structure of the early universe. Furthermore, a lot of unexplored black holes are thought to be located in surrounding galaxies and could be detected by eROSITA.

By observing dust scattering halos, new results on the chemical composition of interstellar dust will be obtainted. Those halos evolve out of flat angle scattering processes of X-ray radiation in the interstellar medium.

IAAT Participation

The Institute for Astornomy and Astrophysics Tübingen (IAAT) is mainly involved in the construction and development of the following modules:

  • Elektronic boxes: Each camera on eROSITA has its own electronic box. Those boxes are made of aluminium. On board are seven electronic boxes for the corresponding cameras, as well as two additional boxes for data processing. The IAAT was involved in the construction of these boxes.
  • Sequencer preparation: The eROSITA instrument needs a sequencer to trigger the electronics. The IAAT was involved in the work at the preliminary sequencer for eROSITA.
  • Detector background simulations.
  • Measurements of proton reflection efficiency on eROSITA mirrors.

National and international collaboration

  • German Aerospace Center (DLR)
  • Max Planck Institute for Extraterrestrial Physics (MPE)
  • Russian Space Agency Roskosmos

Last Update 08/2018: Eva Laplace, Inga Saathoff, Chris Tenzer